FOX - Factory Race Series 3.0 Front Coil-Over Reservoir Shock (Pair) - Adjustable

FOX - Factory Race Series 3.0 Front Coil-Over Reservoir Shock (Pair) - Adjustable

Race‑bred damping for control at speed. Tuned coil‑overs bring position‑sensitive control and on‑trail confidence.

Why It Matters

• Position‑sensitive damping for control in rough terrain
• External reservoirs and DSC allow tuning for load and terrain
• Confidence at speed with improved heat management

Key Features

• Internal Bypass architecture with multiple damping zones
• Dual Speed Compression (DSC) adjusters
• Type III hard‑anodized aluminum bodies with external reservoirs

Technical Specs

• Travel: ~5.42" | Ext: ~23.44" | Comp: ~17.95"
• Lift range: ~3–4.5" front (requires aftermarket UCA)
• 3.0" hard‑anodized aluminum bodies; finned DSC reservoirs
• Max wheel backspacing ~4.5" for clearance

What’s Included

• Front or rear coil‑over shock pair (per product)
• External reservoirs with DSC adjusters (per product)
• Mounting hardware

Compatibility

• Excludes Bronco Raptor

Installation / Usage Overview

• Bolt‑on coil‑over replacement
• Set ride height within recommended range
• Cycle steering/suspension and verify clearances
• Align after install

Please Note

• Requires Upper Control Arms; tuneable DSC (HS/LS compression).

Installation Disclaimer

Lift installations should be performed by a qualified technician. After installation, perform an alignment, re-torque fasteners after the first 50–100 miles, and re-check periodically. Always follow manufacturer instructions.

Safety Reminder: After any suspension change, perform a full alignment and torque check. Verify tire clearance at full steering lock and full compression before driving.

Bronco Nation Members: Log in to unlock your exclusive 10% OFF member pricing!